If you're planning to get a holiday tree for your home, you may find unexpected guests have already made their home in your evergreen selection. Common holiday trees such as firs, pines, and spruces can host pests such as aphids, scales, mites, bark beetles, or even praying mantis egg cases. These pests may be present regardless of whether you select your tree from a local tree lot or go to cut your holiday tree at a nearby tree farm or forest. But don't worry, any insects on your holiday tree are not harmful to you or your home.

Still, there are some things you can do to reduce the pests on your holiday tree.

• When you have selected your tree, vigorously shake your tree to dislodge crawling or flying insect pests.
• Before bringing your tree inside, examine the branches and trunk and prune any infested branches.
• After your tree is inside, continue to monitor and vacuum any insect you find around the base of the tree.
• Avoid spraying the tree with any pesticide, as they could be flammable and most likely not intended for tree pests or labeled for indoor use. Even if sprayed on the tree while outside, you are still bringing the tree inside and could expose yourself and your family to pesticides.

Rest assured, most holiday trees will be free of pest infestations, but for more information on pests specific to holiday trees in California, please see the UC IPM website information on pests of trees, shrubs, and woody ornamentals.

We're looking for your feedback! Please consider taking a quick, anonymous survey to help us serve you better: https://bit.ly/2ZJJVEI

 

This time of year, deciduous trees go dormant, and evergreen trees such as pine are more visible in the landscape. Pine trees, like other plants, can suffer from attack by pests, whether on your property or in our forested areas in California.

Pine trees do best when planted in well-drained soil in full sun, and most species need little water once established. Trees can ward off attacks by many insects and diseases if taken care of properly.

Several diseases can affect pine trees, such as rusts, blight, and root rot. Disease symptoms vary, but may include discoloration of leaves or needles, cankers, galls, and ooze.

Pine trees are susceptible to damage by over 20 different kinds of insects, including aphids, borers, caterpillars, mealybugs, and weevils. Look for signs of insects by examining needles, branches, and bark. To learn about some of the various beetles attacking trees and devastating pine forests, read the article Pines, Drought and Beetles.

When your pine tree looks unhealthy but you can't find any traces of an insect pest or disease, a possible cause is an environmental disorder. These include drought, frost, mineral deficiencies and excesses, and others. Environmental, or abiotic, disorders can be difficult to diagnose.

See a larger list of diseases, insects, and environmental disorders that affect pines by visiting the Pests in Gardens and Landscapes: Pine web page. For help diagnosing a problem, contact your local UC Master Gardener office.

You can also read about tree deaths caused by the drought and other factors as well as how to keep your trees healthy by visiting the UC ANR Forest Research and Outreach page on Tree Mortality.

[From the August 2015 issue of the UC IPM Green Bulletin]

Although pine trees are comparatively drought tolerant, there comes a point where even hardy trees become stressed by lack of water. Stressed pines frequently exhibit symptoms such as thin, slightly yellowish canopies, or roots that "spider" across lawns (Figure 1). By the time pine trees begin turning brown, they are usually dying, but with some precautions, many trees can be saved before they reach this point.

California has a number of native bark beetle species that individually do only minor damage as they bore through the outer bark to reach the inner bark (phloem) and wood surface. Bark beetles are relatively small insects; most species are smaller than a grain of rice. When their population densities are low, these beetles typically attack only the most stressed pines. However, when their population densities are high, they attack and kill healthier trees (Figure 2). If drought conditions continue and beetle populations grow, the beetles can attack in numbers large enough to overwhelm tree defenses.

Healthy pines “pitch out” beetles by filling their tunnels with white- to tan-colored sap (Figure 3). Sap production requires water, and if water is scarce, the beetles may succeed. A successful beetle attack is often marked by a small, pinkish, volcano-shaped pitch tube at the entrance or small excreted bits of coarse boring dust, or frass, trapped in bark fissures and piled at the base of the tree (Figure 4). Pines typically do not die if there are only a few successful boring tunnels, and the color of the pitch tube will usually fade with age to a crystalline white.

Deep-red fresh sap around open tunnels typically indicates that a more serious invasion is in progress. Severely stressed trees cannot fight back, and may produce little or no sap at all. Instead, all you may find are piles of frass in the bark fissures or on the ground. Regardless of whether the tree is defending itself or not, little can be done to stop an infestation once the beetles are in the tree.

Consider removing heavily infested trees while they are still green. Once the trees have turned red, most of the bark beetles will have already emerged. However, if the tree poses a risk to life or property it should still be removed. If the tree is part of a larger forest or is otherwise far away from people or structures, consider retaining it for wildlife value. Animals that need dead trees (“snags”) for homes may find this old dead tree the perfect place to raise a family.

Since little can be done to treat a bark beetle infestation, preventive measures are the best practice. The care a pine receives can have a significant impact on its survival when bark beetle populations are on the rise. If the tree is of high aesthetic value, consider irrigating it in late spring or early summer. Place a soaker hose just inside the dripline, cover it with mulch if possible, and run the hose until the soil is moist to a depth of 12 inches. Wait until the upper 12 inches of soil is dry before irrigating again.

Thinning weak, diseased, deformed, and beetle-infested trees from a stand can reduce competition for water among remaining trees. If using this approach, try to retain a variety of tree ages and sizes. Remove downed trees and clean up brush piles that can serve as "ladder" fuels in the event of a fire. Finally, and only if necessary, prophylactic applications of insecticides to the bark surface can be used to protect high value trees from bark beetle attack.

Learn more about various beetles that attack trees at UC IPM's Pest Notes: Bark Beetles or the tree-boring beetles page.

- Steven Swain, Environmental Horticulture Advisor, Marin & Sonoma counties, svswain@ucanr.edu