Biopesticides are based on naturally occurring microorganisms, plant extracts or other materials and are regulated by the United States Environmental Protection Agency (EPA)'s Biopesticide Division. Biopesticides have been safely used for over 63 years and are generally subjected to reduced regulation compared to conventional chemical pesticides.

Biopesticides can be developed from plant extracts or entomopathogenic microorganisms.  Graphic: Surendra Dara

The active ingredient in microbial pesticides consists of a microorganism, such as a bacterium, fungus, nematode, protozoan or virus. While microbials are capable of assisting in the management of many different types of pests, each type of microorganism tends to be relatively specific for a target pest or group of pests. Biochemical pesticides are based on naturally occurring substances, which function by providing pest management through non-toxic mechanisms. Biochemical pesticides may function by disrupting or interfering with mating, such as in the case of insect sex pheromones or various plant extracts which serve as insect attractants used with traps. Conventional pesticides, by contrast, are generally synthetic materials that directly kill or inactivate the pest (Leahy et al., 2014).

Biopesticide development

Typically, samples of microorganisms or infected arthropods are collected from natural environments. Samples are taken to the laboratory and plated on media; thereafter, various colonies form from the collected samples. Individual colonies of interest may be selected, suspended, and examined for pesticidal activity during laboratory bioassays (Taylor, 1988). As part of the laboratory bioassay process, researchers screen candidates against a number of potential targets, which may vary widely, depending upon institutional goals and availability.

A key initial task is identification and characterization of the pesticidal compounds sourced from the plants or microbes collected in natural settings (Strobel and Daisy, 2003). Part of this process involves isolating and eliminating any compounds which have potential human health implications or may negatively impact non-targets organisms (USDA, 2017b). Additionally, analytical assays based on bioactive chemistry are developed to ensure quality control during the manufacturing process (Strobel and Daisy, 2003).

Several steps are involved with product and process development. First, user-friendly formulations are developed in both lab and pilot facilities. Next, manufacturing processes are developed and scaled in arenas including lab, pilot, and manufacturing facilities (Strobel and Daisy, 2003). Thereafter, field studies are conducted and data are gathered for the regulatory submissions which support product registration (USDA, 2017a).

Biopesticide registration process

A special committee has been established within the EPA due to the fact that it is often challenging to determine whether a substance meets the criteria for classification as a biochemical pesticide (Leahy et al., 2014). The Biopesticide Pollution Prevention Division (BPPD) of the EPA is charged with data review required for registration. Requirements for registration include acute studies consisting of oral, inhalation, intravenous, and dermal tests, in addition to eye and skin studies in rodents. A product chemistry review involving a five-batch analysis is also required by BPPD. Microbiology and quality control investigations assure that material is free of human pathogens. Ecological effects, including impact on non-target birds, fish, Daphnia, honeybees, lacewings, ladybeetles, and parasitic wasps is additionally determined. The review process is taken one step further during the endangered species review. Finally, the matter of the Exemption from Tolerance Petition for Food Use is addressed (EPA, 2017). It should be noted that efficacy data are required in addition to the aforementioned topics when attempting to register a new biopesticide in California (CDPR, 2017). There are several examples of successful pesticides which are sourced from natural products and registered as chemical pesticides (Fig. 1).

Fig. 1. Chemical pesticides developed from natural sources.  Graphic: Melissa O'Neal

Abamectin is an insecticide/miticide derived from Streptomyces avermitilis, a microorganism found in soil.  Its mode of action involves interference with neurotransmission (CDPR, 1993). Tebufenozide is an insect growth disruptor which interferes with insect molting hormones (Smagghe et al., 2012). The spinosyns are a family of chemicals produced by fermentation of Saccharopolyspora bacteria which are toxic due to disruption of neurotransmitters in both target and non-target organisms (Kirst, 2010). Azoxystrobin is a synthetic material derived from phytotoxic compounds which naturally occur in the mushrooms Oudemansiella mucida and Strobilurus tenacellus.  Its mode of action is disruption of energetic reactions involving ATP synthesis (AgChemAccess, 2015). Finally, pyrethrins are naturally occurring materials derived from the chrysanthemum (Chrysanthemum cinerariaefolium) flowers and acts as a contact nerve poisons (Extoxnet, 1994).

The following tables 1-5 provide an overview of some of the commercial biopesticides currently registered in the US and  other countries for controlling insects, mites, plant pathogenic fungi, and plant parasitic nematodes. 

Table 1. Microbial insecticides andacaracides.

Table 2. Plant extract and oil insecticides and acaricides.

Table 3. Microbial fungicides.

Table 4. Non-microbial fungicides.

Table 5. Bionematicides.

References

AgChemAccess. 2015. Azoxystrobin. http://www.agchemaccess.com/Azoxystrobin.

(CDPR). California Department of Pesticide Regulation. 1993. Abamectin Avert Prescription Treatment 310 (Section 3 Registration) Risk Characterization Document. http://www.cdpr.ca.gov/docs/risk/rcd/abamectin.pdf

(CDPR). California Department of Pesticide Regulation. 2017. How to apply for pesticide product registration. http://www.cdpr.ca.gov/docs/registration/instructions.htm

(EPA). U.S. Environmental Protection Agency. 2017. Biopesticides. https://www.epa.gov/pesticides/biopesticides#what

Extoxnet. 1994. Pesticide information profile: Pyrethrins. http://pmep.cce.cornell.edu/profiles/extoxnet/pyrethrins-ziram/pyrethrins-ext.html

Kirst, H.A. 2010. The spinosyn family of insecticides: realizing the potential of natural products research. J Antibiot 63(3): 101-11. doi: 10.1038/ja.2010.5.

Leahy, J., M. Mendelsohn, J. Kough, R. Jones, and N. Berckes. 2014. Biopesticide oversight and registration at the U.S. Environmental Protection Agency. In Biopesticides: State of the Art and Future Opportunities; Coats, et al.; ACS Symposium Series; American Chemical Society: Washington, DC, 2014.

Smagghe, G., L.E. Gomez, and T.S. Dhadialla. 2012. Insect growth disruptors. Adv Ins Phys 43: 1-552.

Strobel, G. and B. Daisy. 2003. Bioprospecting for microbial endophytes and their natural products. Microbiol Mol Bio Rev 67(4): 491-502.

Taylor, J.K. 1988. Quality assurance of chemical measurements. Chelsea, MI: Lewis.

(USDA). United States Department of Agriculture. 2017a. About AMS.

https://www.ams.usda.gov/about-ams/programs-offices/national-organic-program

(USDA). United States Department of Agriculture. 2017b. USDA FY 2016 avoiding harm from invasive species (USDA Do No Harm 2016 Report, Part 2). https://www.invasivespeciesinfo.gov/docs/resources/usdanoharm20170119.docx

http://ucanr.edu/articlefeedback

California is the leading producer of tomatoes, especially for the processing market (CDFA, 2017).  Tomato is the 9^th most important commodity in California valued at $1.71.  Processed tomatoes are ranked 6^th among the exported commodities with a value of $813 million.  While good nutrient management is necessary for optimal growth, health, and yields of any crop, certain products that contain minerals, beneficial microbes, biostimulants, and other such products are gaining popularity.  These materials are expected to improve crop health and yield, impart soil or drought resistance, induce systemic resistance, or improve plant's immune responses to pests, diseases, and other stress factors (Berg, 2009; Bakhat et al., 2018; Chandra et al., 2018; Shameer and Prasad, 2018).  Maintaining optimal plant health through nutrient management is not only important for yield improvement, but it is also an important part of integrated pest management strategy as healthy plants can withstand pest and disease pressure more than weaker plants and thus reduce the need for pesticide treatments.

Experimental plots, transplanting, and treatment details.

Methodology

A study was initiated in the summer 2017 to evaluate the impact of various treatment programs on tomato plant health and yield.  Processing tomato cultivar Rutgers was seeded on 7 June and transplanted on 18 July, 2017 using a mechanical transplanter.  Monoammonium phosphate (11-52-0) was applied at 250 lb/ac as a side-dress on 7 August as a standard for all treatments.  Since planting was done later in the season, crop duration and harvesting period were delayed due to the onset of fall weather.  Plots were sprinkler irrigated daily or every other day for 3-4 hours for about 2 weeks after transplanting.  Drip irrigation was initiated from the beginning of August for 12-14 hours each week and for a shorter period from mid October onwards.

There were five treatments in the study including the standard.  Each treatment had a 38” wide and 300' long bed with a single row of tomato plants.  Treatments were replicated four times and arranged in a randomized complete block design.  Different materials were applied through drip using a Dosatron injector system, sprayed at the base of the plants with a handheld sprayer, or as a foliar spray using a tractor-mounted sprayer based on the following regimens.

1. Standard
2. AgSil® 21 at 8.75 fl oz/ac in 100 gal of water through drip (for 30 min) every 3 weeks from 31 July to 13 November (6 times).  AgSil 21 contains potassium (12.7% K2O) and silicon (26.5% SiO2) and is expected to help plants with mineral and climate stress, improve strength, and increase growth and yields.
3. Yeti Bloom^TM  at 1 ml/gallon of water.  Applied to the roots of the transplants one day before transplanting followed by weekly field application through the drip system from 7 August to 13 November (15 times).  Yeti is marketed as a biostimulant and has a consortium of beneficial bacteria - Pseudomonas putida, Comamonas testosterone, Citrobacter freundii, and Enterobacter cloacae.  Yeti Bloom is expected to enhance the soil microbial activity and helps with improved nutrient absorption.
4. Tech-Flo®/Tech-Spray® program contained five products that supplied a variety of macroandmicro nutrients.  Products were appliedthroughdrip (for 30 min) at the following rates and frequencies in 300gal of water. 
   1. Tech-Flo All Season Blend #1 1 qrt/ac in transplant water and again at first bloom on 28 August.
   2. Tech-Flo Cal-Bor+Moly at 2 qrt/ac at first bloom on 28 August.
   3. Tech-Flo Omega at 2 qrt/ac in transplant water and again on 11 September (2 weeks after the first bloom).
   4. Tech-Flo Sigma at 2 qrt/ac on 11 September (2 weeks after the first bloom).
   5. Tech-Spray Hi-K at 2 qrt starting at early color break on 25 September with three follow up applications every two weeks.
5. Innovak Global program contained four products.
   1. ATP Transfer UP at 2 ml/liter of water sprayed over the transplants to the point of runoff just before transplanting.  Three more applications were made through drip (for 30 min) on 7 and 21 August and 4 September. This product contains ECCA Carboxy® acids that promote plant metabolism and expected to impart resistance to stress factors.
   2. Nutrisorb-L at 40 fl oz/ac applied through drip (for 30 min) on 31 July, 14 August (vegetative growth stage), 4 and 18 September, and 2 October (bloom through fruiting).  Nutrisorb-L contains polyhydroxycarboxylic acids, which are expected to promote root growth and improve nutrient and water absorption.
   3. Biofit®N at 2 lb/ac through drip (for 30 min) on 31 July, 21 August (3 weeks after the first), and 4 September (at first bloom).  Biofit contains a blend of beneficial microbes – Azotobacter chroococcum, Bacillus subtilis, B. megaterium, B. mycoides, and Trichoderma harzianum.  This product is expected to improve the beneficial microbial activity in the soil and thus contribute to improved soil structure, root development, plant health, and ability to withstand stress factors.
   4. Packhard at 50 fl oz/ac in 50 gal of water as a foliar spray twice during early fruit development (on 11 and 18 September) and every 2 weeks during the harvest period (four times from 2 October to 13 November).  Contains calcium and boron that improve fruit quality and reduce postharvest issues.

A 50' long area was marked in the center of each plot for observations.  Plant health was monitored on 1, 8, and 22 August by examining each plant and rating them on a scale of 5 where 0 represented a dead plant and 5 represented a very healthy plant.  Yield data were collected from 11 October to 5 December on eight harvest dates by harvesting red tomatoes from each plot.  On the last harvest date, mature green tomatoes were also harvested and included in the yield evaluation.  Data were analyzed using analysis of variance and Tukey's HSD test was used for means separation.

Results and discussion

There was no statistically significant difference (P > 0.05) in the health of the plants in August (Fig. 1) or in the overall seasonal yield (Fig. 2) among treatments.  The average health rating from three observations was 3.94 for the standard, 4.03 for AgSil 21, 4.45 for Yeti Bloom, 4.38 for Tech-Flo/Spray program, and 4.35 Innovak Global program.

Fig. 1. Plant health on a 0 (dead) to 5 (very healthy) rating on three observation dates.

When the seasonal total yield per plot was compared, Yeti Bloom had 194.1 lb followed by, Innovak program (191.5 lb), AgSil 21 (187.3 lb), the standard (147.4 lb) and Tech-Flo/Spray program (136.5 lb).  Due to the lack of significant differences, it is difficult to comment on the efficacy of treatments, but the yield from AgSil 21 was 27% more than the standard while yields from Innovak program and Yeti Bloom were about 30% and 32% higher, respectively.

Fig. 2. Seasonal total yield/plot from different treatments.

Fig. 3. Percent difference in tomato yield between the standard and other treatment programs.

Studies indicate that plants can benefit from the application of certain minerals such as silicon compounds and beneficial microorganisms, in addition to optimal nutrient inputs.  Silicon is considered as a beneficial nutrient, which triggers the production of plant defense mechanisms against pests and diseases (Bakhat et al., 2018).  Although pest and disease conditions were not monitored in this study, silverleaf whitefly (Bamisia tabaci) infestations and mild yellowing of foliage in some plants due to unknown biotic or abiotic stress were noticed.  AgSil 21 contains 26.5% of silica as silicon dioxide and could have helped tomato plants to withstand biotic or abiotic stress factors.  Similarly, beneficial microbes also promote plant growth and health through improved nutrient and water absorption and imparting the ability to withstand stresses (Berg, 2009; Shameer and Prasad, 2018).  Beneficial microbes in Yeti Bloom and BiofitN might helped the tomato plants in withstanding stress factors and improved nutrient absorption.  Other materials applied in the Innovak program might have also provided additional nutrition and sustained microbial activity.

The scope of the study, with available resources, was to measure the impact of various treatments on tomato crop health and yield.  Additional studies with soil and plant tissue analyses, monitoring pests and diseases, and their impact on yield would be useful.

Acknowledgements: Thanks to Veronica Sanchez, Neal Hudson, Sean White, and Sumanth Dara for their technical assistance and the collaborating companies for free samples or financial assistance.

References

Bakhat, H. F., B. Najma, Z. Zia, S. Abbas, H. M. Hammad, S. Fahad, M. R. Ashraf, G. M. Shah, F. Rabbani, S. Saeed.  2018.  Silicon mitigates biotic stresses in crop plants: a review.  Crop Protection 104: 21-34.  DOI: 10.1016/j.cropro.2017.10.008.

Berg, G.  2009.  Plant-microbe interactions promoting plant growth and health: perspectives for controlled use of microorganisms in agriculture.  Appl. Microbiol. Biotechnol. 84: 11-18.  DOI: 10.1007/s00253-009-2092-7.

CDFA (California Department of Food and Agriculture).  2017.  California agricultural statistics review 2015-2016. (https://www.cdfa.ca.gov/statistics/PDFs/2016Report.pdf)

Chandra, D., A. Barh, and I. P. Sharma.  2018.  Plant growth promoting bacteria: a gateway to sustainable agriculture.  In: Microbial biotechnology in environmental monitoring and cleanup.  Editors: A. Sharma and P. Bhatt, IGI Global, pp. 318-338.

Shameer, S. and T.N.V.K.V. Prasad.  2018.  Plant growth promoting rhizobacteria for sustainable agricultural practices with special reference to biotic and abiotic stresses.  Plant Growth Regulation, pp.1-13.  DOI: 10.1007/s10725-017-0365-1.

http://ucanr.edu/articlefeedback 

Eggs, nymphs, and adult silverleaf whitefly on zucchini.  Photo by Surendra Dara

A study was conducted in the summer of 2017 to evaluate the efficacy of various chemical, botanical, and microbial pesticides against arthropod pests on zucchini.  Zucchini plants initially had a high aphid infestation, but populations gradually declined due to natural control by lady beetle activity.  However, heavy silverleaf whitefly (Bemisia tabaci) infestations developed by the time the study was initiated.  Other pests that were present during the study period were aphids (possibly melon aphids), the western flower thrips (Frankliniella occidentalis), and the pacific spider mite (Tetranychus pacificus).

Pacific spider mite (egg, male, and females), western flower thrips larva, and unknown aphids on zucchini.  Photo by Surendra Dara

Methodology

Experiment was conducted using a randomized complete block design with 10 treatments.  Each treatment had two 38” wide and 300' long rows of zucchini replicated four times.  Treatments included i) untreated control, ii) Sivanto 200 SL (flupyradifurone) 14 fl oz/ac, iii) Sequoia (sulfoxaflor) 2.5 fl oz/ac, iv) Venerate XC (heat-killed bacterium, Burkholderia rinojensis strain A396) 4 qrt/ac, v) PFR-97 20% WDG (entomopathogenic fungus, Isaria fumosorosea Apopka strain 97) 2 lb/ac, vi) I1800AA (undisclosed botanical extract) 10.3 fl oz/ac, vii) I1800A 12.7 fl oz, viii) I1800A 17.1 fl oz, ix) I1800A 20.5 fl oz, and x) VST-00634LC (based on a peptide in spider venom) 25%.  A spray volume of 50 gpa for all treatments except for VST-00634LC, which had 25 gpa.  Treatments were applied on 28 August and 4 September, 2017 using a tractor-mounted sprayer with three Teeject 8003vs flat spry nozzles that covered the top and both sides of each bed.

Pest populations were counted before the first spray application and 4 days after each application.  On each sampling date, one mid-tier leaf was collected from each of the five randomly selected plants within each plot.  A 2-square inch disc was cut out from the middle of each leaf and the number of aphids, eggs and nymphs of silverleaf whitefly, larvae of western flower thrips, and eggs and mobile stages of pacific spider mite were counted under a dissecting microscope.  Data were analyzed using Statistix software and Tukey's HSD test was used to separate significant means.

Spraying, sampling, and counting

Results

Efficacy varied among different treatments and for different pests.

Aphid: There was a general decline in aphid populations during the study period and there was no difference (P > 0.05) among the treatments (Fig. 1). 

Fig. 1. Aphid numbers and percent change from pre-treatment counts

Western flower thrips: Nymphal numbers declined in most of the treatments during the observation period (Fig. 2).  However, significant differences (P = 0.0220) only after the second spray application where Sivanto treatment had significantly fewer thrips than Venerate treatment (Fig. 2).  There was a 92.5% decline by the end of the study, compared to the pre-treatment counts, from PFR-97 application, followed by 88.1% decline in Sivanto, 85.4% in VST-00634, and 82.9% in I1800AA at 10.3 fl oz.

Fig. 2. Western flower thrips larvae and percent change from pre-treatment counts

Pacific spider mite: There was an increase in mite eggs in all treatments after the first spray application followed by a decline after the second one without significant differences (P > 0.05) (Fig. 3)  Similar trend was also seen in mobile stages in some treatments.  Number of mobile stages was significantly different (P = 0.0025) only after the first spray where untreated control, PFR-97, Venerate, and I1800AA at 20.5 fl oz had the lowest.  When percent change in egg numbers from the pre-treatment counts, only I1800AA treatments reduced egg numbers after the second spray with a 33.8% decline at 10.3 fl oz rate, 35.7% at 20.5 fl oz, and 60% at 17.1 fl oz.  There was also a decline in the mobile stages after the second spray with 54.1% reduction in untreated control to 67.7% in PFR-97 treatment.

Fig. 3. Pacific spider mite egg and mobile stages and percent change from pre-treatment counts

Silverleaf whitefly:  There was a general increase in the egg and nymphal stages of whitefly during the study (Fig. 4).  Significant differences were seen pre-treatment counts of egg (P = 0.0330) and nymphal stages (P = 0.0011), and after the second spray in nymphal stages (P = 0.0220).  Compared to the untreated control, both Sivanto and Sequoia resulted in a significant reduction in egg numbers after the first spray, whereas Sequoia, Venerate, and I1800AA at 20.5 fl oz reduced nymphal stages after the second spray.  When the percent change from the pre-treatment counts was compared, only Sivanto and Sequoia reduced whitefly egg numbers after both sprays.  There was also a reduction in eggs after the first spray from I1800AA at 17.1 fl oz.  However, there was a reduction in nymphal stages after the first spray in Sivanto, I1800AA at 17.1 fl oz, and VST-00634, and after the second spray in Sivanto, Sequoia, Venerate, and I1800AA at 17.1 and 20.5 fl oz.

Fig. 4. Silverleaf whitefly egg and nymphal stages and percent change from pre-treatment counts

All arthropod pests: When all data were combined for different pests and their life stages, Sivato, Sequia, and PF-97 resulted in a significant (P = 0.0001) decline in pest numbers compared to untreated control after the first spray.  Only Sivanto and Sequoia caused such a reduction (P = 0.0048) after the second spray.

Fig. 5. All arthropod pest numbers and percent change from pre-treatment counts

In general, both the chemical pesticides (Sivanto and Sequoia) provided a very good pest control.  The efficacy of the botanical extract was moderate to good depending on the pest, life stage, or the application date.  Spider venom-based product also provided a good control while microbial products had a moderate impact.  Although chemical pesticides appeared to be very efficacious, non-chemical alternatives were also effective.  It is important to consider all these options to apply in combinations or rotations to obtain desired pest suppression without posing the risk of insecticide resistance.

Acknowledgements: Thanks for the financial support of Arysta LifeScience, CertisUSA, Dow AgroSciences, and Vestaron, and the technical assistance of Neal Hudson.

http://ucanr.edu/articlefeedback 

Biopesticide refers to a pesticide which originates from animals, microorganisms, or plants.  In addition to preventing yield losses through pest and disease control, biopesticides improve environmental and human health by contributing to the reduction of chemical pesticides as well as by improving the quality of produce (Popp et al., 2012).  Additionally, these products have the potential to improve harvest and shipping flexibility, assist with environmental stewardship, and assist growers to achieve sustainability goals. Biopesticides are also important tools in integrated pest management (IPM) programs and reducing the risk of resistance to chemical pesticides (Pretty and Bharucha, 2015), improving worker safety through short restricted entry intervals (Valland, n.d.), conserving natural enemies, and maintaining environmental health (EPA, 2017a).

Biopesticides are inherently less toxic than conventional pesticides. Most affect only the target pest and closely related organisms, in contrast to broad spectrum conventional pesticides that may affect nontarget organisms such as beneficial insects, birds, wildlife, aquatic animals, and mammals. The majority of biopesticides often rapidly decompose, resulting in decreased exposure as well as preventing many pollution problems commonly associated with conventional pesticides. Although relatively safer than chemical pesticides, users or applicators should follow safety guidelines and wear personal protective equipment according to the label directions (EPA, 2017a).  It is also important to follow guidelines for spray volume, application rates, droplet size, water pH, compatibility with tank-mix partners, time and frequency of application, and other details to ensure efficacy of the biopesticides (van Zyl et al., 2010; Wang & Liu, 2007; Whitford et al., 2009).

Biopesticides use has been increasing in the recent years.  They can be used as standalone treatments or combined or rotated with other pesticides in both organic and conventional production systems.  The fact that there are no residues is a huge benefit for exported commodities, as maximum residue limit issues continue to be a challenge in this arena (Berger, 2013).

In expanding upon the role of biopesticides in biocontrol, the topic of resistance management is a key consideration. Pest resistance to conventional chemical pesticides is a significant concern. Scientific research has repeatedly demonstrated that continuous use of the same class of pesticides, especially those reliant on a single mode of action, will result in the emergence of a pest population resistant to those products (Osteen et al., 2012). Populations of insect pests, plant pathogens, nematodes, and weeds all have the ability to develop resistance quickly, even to different types of functionally similar chemistries. This phenomenon is called cross-resistance and is caused by multi-chemistry detoxification mechanisms present in many pest populations (Horowitz and Ishaaya, 2009).

Because of the increasing number of novel, low-impact chemistries available, educators and growers have additional tools to manage resistance within IPM programs (EPA, 2017a). Biopesticides have long been used in combination with synthetic chemistries to provide the basis for excellent control programs that effectively manage resistance. Additionally, they typically have modes of action that are different from synthetic pesticides and do not rely on a single target site for efficacy. Properly used, these products have the potential to extend the effective field life of all products by curtailing the development of resistant pest populations (Horowitz and Ishaaya, 2009).

According to the United States Environmental Protection Agency (EPA), “IPM is an effective and environmentally sensitive approach to pest management that relies on a combination of common-sense practices” (2017b, p. 1). The University of California Statewide Integrated Pest Management Program (UCIPM) (2017) defines the IPM approach as combining prevention, cultural, physical, biological and chemical means to control pests, all the while minimizing economic, public health, beneficial as well as non-target organism, and environmental risks. Biopesticides are noted among the low-risk and most highly effective tools for achieving crop protection in IPM systems. The challenges of farming require that IPM systems actively integrate multiple management approaches to balance optima productivity with sustainability (BPIA, 2017).

Biopesticides should be considered as a component of a holistic total program and used at an appropriate time and pest density. Today, many forward looking IPM professionals are incorporating biopesticides into traditionally conventional pest management strategies (EPA, 2017b). However, education and training are needed to address biopesticide best use practices, the methods of integrating them into IPM programs; as well as instruction to promote an understanding of their unique modes of action (EPA, 2017b). Part of the educational process involves research through fair and realistic field trials that evaluate biopesticides both as standalone treatments as well as in combination and rotation with other options with an objective of improving IPM practices (Abler et al., 1992; Kumar and Singh, 2015).  All of these learning experiences are useful in demonstrating the science of biopesticide use and establishing best use practices.  A better understanding of biopesticide potential and the mode of action of different active ingredients, increased grant support to promote biopesticide research, and productive grower-industry-researcher collaborations to generate applied research data and design IPM strategies are necessary to make the best use of biopesticides and for environmental sustainability.

References

Abler, D.G., G.P. Rauniyar, and F.M. Goode. 1992. Field trials as an extension technique: The case of Swaziland. NJARE 21(1): 30-35.

Berger, L. 2013. MRL issues and international trade commodity perspectives, pp 3-48. In Proceedings: Idaho Pesticide MRL Workshop, 2 December 2013, Boise, ID. AgBusiness Resources, Visalia, CA.

(BPIA). Biological Products Industry Alliance. 2014. Biopesticides in a program with traditional chemicals offer growers sustainable solutions. http://www.bpia.org/wp-content/uploads/2014/01/grower-final.pdf

(BPIA). Biological Products Industry Alliance. 2017. Benefits of biological products. http://www.bpia.org/benefits-of-biological-products/

(EPA). U.S. Environmental Protection Agency. 2017a. Biopesticides. https://www.epa.gov/pesticides/biopesticides#what

(EPA). U.S. Environmental Protection Agency. 2017b. Integrated pest management principles. https://www.epa.gov/safepestcontrol/integrated-pest-management-ipm-principles

Horowitz, A. and I. Ishaaya. (2009). Biorational control of arthropod pests: Application and resistance management. Springer, New York, NY.

Kumar, S., and A. Singh. 2015. Biopesticides: Present status and the future prospects. J Fertil Pestic 6: e129. doi:10.4172/2471-2728.1000e129

Osteen, C., J. Gottlieb, and U. Vasavada (eds.). 2012. Agricultural Resources and Environmental Indicators. EIB-98, U.S. Department of Agriculture, Economic Research Service, August 2012.

Popp, J., K. Peto, and J. Nagy. 2012. Pesticide productivity and food security: A review. Agron Sustain Dev 33: 243–255. DOI 10.1007/s13593-012-0105-x.

Pretty, J. and Z.P. Bharucha. 2015. Integrated pest management for sustainable intensification of agriculture in Asia and Africa. Insects 6(1): 152–182.

(UCIPM). University of California Statewide Integrated Pest Management Program. 2017. What is integrated pest management (IPM)? http://www2.ipm.ucanr.edu/WhatIsIPM/

Vallad, G.E. n.d. Use of biopesticides for the management of vegetable diseases. University of Florida Gulf Coast Research and Extension Center. http://ipm.ifas.ufl.edu/pdfs/Bio-Pesticides_Slides_IPM_site.pdf

van Zyl, S.A., J. Brink, F.J. Calitz, S. Coertze, and P.J. Fourie. 2009. The use of adjuvants to improve spray deposition and Botrytis cinerea control on Chardonnay grapevine leaves. Crop Prot 29(1): 58-67. https://doi.org/10.1016/j.cropro.2009.08.012

Wang, C.J. and Z.Q. Liu. 2007. Foliar uptake of pesticides: Present status and future challenge. Pest Biochem Phys 87(1): 1-8. https://doi.org/10.1016/j.pestbp.2006.04.004

Whitford, F., D. Penner, B. Johnson, L. Bledsoe, N. Wagoner, et al. 2009. The impact of water quality on pesticide performance. Purdue Extension Publication PPP-86. https://www.extension.purdue.edu/extmedia/ppp/ppp-86.pdf

http://ucanr.edu/articlefeedback