UC ANR Small Farms Network

Appendix

Quick Links

Back To The Top

Using Micronutrients

Micronutrient deficiencies have not been commonly reported in California. Furthermore, even if a deficiency is found, some vegetable crops yield little, if any, better when you correct the deficiency. To find out which vegetables are most helped when a deficiency is corrected, see Table 9.

nutrients

From "Illinois Agronomy Handbook, 1979-1980," University of Illinois Cooperative Extension Service, Circ. 1129.

Back To The Top

Vegetable Response To Micronutrients

Table 9. Here's our best estimate on how vegetables might react to added micronutrients when a deficiency is corrected.

CropManganeseBoronCopperZincMolybdenumIron
1/low -- little or no response
medium -- intermediate response
high -- highly responsive
Asparaguslowlowlowlowlowmedium
Beanshighlowlowhighmediumhigh
Beetshighhighhighmediumhighhigh
Broccolimediummediummedium highhigh
Cabbagemediummediummedium mediummedium
Carrotsmediummediummediumhighlowhigh
Cauliflowermediumhighmedium high 
Celerymediumhighmedium low 
Cucumbersmediumlowmedium   
Cornmediumlowmediumhighlowmedium
Lettucehighmedium high  
Onionshighlowhighhighhigh 
Parsnipsmediummediummedium   
Potatoeshighlowlowmediumlow 
Radisheshighmediummedium medium 
Spinachhighmediumhigh highhigh
Sweet cornmediumlowmediumhighlowmedium
Tomatoesmediummediummediummediummediummedium
Turnipsmediumhighmedium medium 

Back To The Top

Micronutrients - Soil Applied

Table 10. How to apply micronutrients on deficient soils (General guide).

Soil tests (for zinc or boron) will give you a clue on whether your soil is deficient.

ADDING ZINC TO SOIL (General guide)

Amount of element usually applied per acre

  • 10-20 pounds broadcast or 5 pounds banded.

Usual source

  • Zinc sulfate or zinc oxide or zinc chelate.

Usual formulation

  • Zinc sulfate @ 36% actual zinc;
  • zinc oxide @ 78% actual zinc;
  • zinc chelate @ various formulations.

Amount of usual formulation per acre:

Broadcast--

  • 28 to 56 pounds zinc sulfate or 13 to 26 pounds zinc oxide.

Banded--

  • 14 pounds zinc sulfate or 6.5 pounds zinc oxide. Chelates are applied according to label instructions.

Application method

  • Broadcast or banded.

How often to apply

  • Every 4 to 7 years if broadcast; every year if banded.
ADDING COPPER TO SOIL

Copper chelate is suggested, since other sources may become unavailable on alkaline soils. Foliar sprays may be used. Follow label instructions.

BORON

To prevent soil buildup of boron on sensitive crops that might follow, foliar sprays are often preferred.

IRON

Foliar sprays have normally been more practical on row crops, except perhaps on leafy vegetables. On leafy vegetables, you will need to be very careful not to burn leaves, especially with unproven formulations.

Back To The Top

Micronutrients - Foliar Applied

Table 11. Foliar sprays for deficient crops; General guidelines for usual amounts applied in various states:

MaterialHOW TO APPLY
Grams of material per gallon of water for small trial *
Pounds of material per acre**Comments
* Actual B applied is 0.1 lb for medium responsive crops or 0.3 lb for highly responsive crops.
** The range shown in grams per gallon of test spray is the same range shown in pounds per 100 gal per acre.
Manganese sulfate18.1 to 27.2 g4 to 6Do not apply without testing for leaf burn first.
Zinc sulfate3.6 to 9.0 g0.8 to 2A second spray may be needed in 2 or 3 weeks.Do not apply zinc sulfate without testing for leaf burn first.
Fixed copper or chelated copper or Bordeaux mixtureFollow label directions; 1 lb per 100 gal = 4.5 g per 1 gal.Follow label directions.One spray should be enough for deficient crops. Do not apply without testing for leaf burn first.
Solubor ®2.3 g to 6.8 g 20% material*0.5 to 1.5 lb of 20% material*Do not apply without testing for leaf burn first.
Iron chelateFollow label directions; 1 lb per 100 gal = 4.5 g per 1 gal.Follow label directionsOne to 2 sprays. Do not apply without testing for leaf burn first.
Sodium molybdate0.6 g2 ozRarely applied except when deficient on cauliflower, broccoli, onion. Do not apply without testing for leaf burn first.
Calcium nitrate22.7 g to 68.0 g5 to 15Use the 15 pound rate for prevention of blackheart on celery. May be tested on tomatoes where tissue is low in calcium. Do not apply without testing for leaf burn first.
Magnesium sulfate45.4 g10Where used on celery it should be tested with 5 lb calcium nitrate to prevent blackheart. Do not use on crops without testing for leaf burn first.


WARNING: Do not spray crops, especially leafy vegetables, with micronutrients shown in Table 11 unless you first test the spray on several feet of row.

USING TABLE 11 FOR DEFICIENT CROPS

Certain conditions could cause the spray to "burn" the crop. For this reason, grams per gallon of "test spray" are listed.

You should use a simple, inexpensive gram scale for such tests. After you've sprayed several feet of row, check plants in 48 to 72 hours. If you see no injury and the weather holds, you can consider going ahead with larger scale treatments. Such "test sprays" are especially important on leafy vegetables. Here, you don't even want a slight "cosmetic" burn.

Back To The Top

Soil Tests

Here are the pages to show the lab. You don't need to understand the technical terms. Just be sure your lab can run these specific tests (not just any testing method).

  1. Saturation percentage (SP)--grams of water required to saturate 100 grams of soil.
  2. Phosphorus--extraction by 0.5 M, pH 8.5 NaHCO3 solution. Also called Olsen bicarbonate extraction. Water soluble P is used to estimate available P in peat and muck soils. Phosphate may be determined in extracts as the molybdenum blue, using ascorbic acid or SnCl2 as the reducing agent.
  3. Potassium--exchangeable K is measured in ammonium acetate or other suitable extract. Except on celery or potatoes, the boiling nitric acid test is also used if the ammonium or sodium acetate test is below 100-120 ppm K.
  4. Zinc--DTPA extraction.
  5. Boron--expressed as water soluble ppm in the saturation extract.
  6. pH--determined as a soil paste wet to the saturation percentage.
  7. ECe--electrical conductivity of the saturation extract expressed as millimhos per centimeter at 250C.
  8. SAR--Sodium Adsorption Ratio; a calculated value used to estimate exchangeable sodium percentage (ESP) after long-term use of the water.
  9. Calcium--exchangeable Ca. For SAR determination, water soluble Na, CA and Mg are used.
  10. Magnesium--exchangeable Mg. (See also calcium, test 9, above.)
  11. Sulfur--available S is extracted by shaking 10 g of soil with 50 ml 0.1 M LiCl. Sulfate is determined in the filtrate using methods of Johnson and Nishita. This has not been a highly reliable test.

Back To The Top

Conversion Tables

CONVERSION TABLE - POUNDS PER ACRE TO KILOGRAMS PER HECTARE

Pounds per acre
(lb./A.html)
Kilograms per hectare
(kg/ha)
Pounds per acre
(lb./A.html)
Kilograms per hectare
(kg/ha)
Kilograms per hectare pounds per acre x 1.12
Pounds per acre = kilograms per hectare x 0.89
0.250.28350392
0.330.37400448
0.50.56450504
0.750.84500560
11.12550616
55.6600673
1011.2700785
4044.8750841
5056800897
100112850953
1501689001009
20022410001121
25028020002242
300336  

CONVERSION TABLE - APPLYING NITROGEN

Pounds N per acreKilograms N per hectarePounds N per acreKilograms N per hectare